Customer Reviews

 

 

Just about every person has their own idea when it comes to Common Causes of Water Damage in a Bathroom.

The bathroom is incredibly prone for wet buildup and also potential water damages due to the constant use of water in it. This short article provides basic examination strategies to help spotting water damage risks.
The regular use water in the restroom makes it extremely vulnerable for moist accumulation and also possible water damages. By checking it frequently, you can minimize water associated damages.
The following collection of evaluations is easy to perform and need to be done as soon as in every 3 months in order to keep your bathroom in good shape and also to avoid prospective water damages brought on by the tub, the shower, pipe joints and also plumbing, sinks, closets, and the toilet
Do not forget doing these evaluations and be detailed while doing them. Keep in mind that these simple assessments can save you a lot of cash by offering early signs for water damage

 

Bathtub and also Shower

The shower as well as bathtub call for special attention and also upkeep. Inspect the tiles as well as replace if split. Ensure that there is no missing cement between the floor tiles. Examine and change cracked caulking at joints where the wall surfaces satisfy the flooring or the tub. Clogged drains pipes and pipelines problems will certainly avoid the bath tub from drying and also may show severe problems underneath the bathtub. Talk to a professional right away to prevent structural damages. Pay attention to stainings or soft areas around the tub wall surfaces as they may suggest an internal leakage.

 

Plumbing

Signs for water damage are tough to detect given that many pipelines are set up inside the wall surfaces.
Pay special attention to flooring as well as wall surfaces moisture and discolorations as they may suggest an invisible plumbing problem. Inspect dampness levels in adjoining spaces too.

 

Sinks and Cabinets

Sinks as well as closets are exposed to wetness and also moisture daily and also are commonly ignored. Evaluate routinely under the sink as well as on the kitchen counter above it. Fix any kind of drip in the trap as it may recommend drainpipe problems. Take a look around the sink, slow-moving draining pipelines may show a blocked drain. Replace sink seals if they are split or loosened.

 

The Toilet

The bathroom is a prone water joint. Check the water lines and search for leakages around the commode seat, in the tube, and also under the water tank. If you spot any kind of indications of dampness on the flooring around the commode, look for leakages in the toilet rim and tank seals.
Understand that hanging toilet bowl antiperspirants boosts the opportunities for obstructions.

 

How to prevent bathroom water damage

 

Water damage is unique in that it builds up over an extended period of time, eventually leading to outbreaks of mould, softening of walls and ceilings, cracks in sealant and tiles, and distortion of base floors and frames.

Bathroom water damage is incredibly common, as we often don’t realise it’s happening until something major happens to attract out attention, such as a bulge appearing in the ceiling or the sealant connecting your bath to the floor becoming cracked.

We spread a lot of excess water around in our bathrooms, which seeps into tiny pores and cracks in all sorts of surfaces where conditions make drying difficult. Besides actual surface water, the steam which billows from our hot showers and freshly-run baths takes its toll as well over time.

Any leaking fixtures, such as taps, showerheads, or toilets, allow water to seep into cracks on floors, walls, and tiles – where mould can begin to bloom and rot sets in.

If you are a concerned homeowner looking to keep your bathroom in tip-top shape for an upcoming inspection, sale, or simply for your own enjoyment, this article will teach you how to identify and repair risks associated with water damage in your bathroom.

 

• 1. Keep your towel close to the shower/bath, and dry yourself off whilst still standing in the shower or bath. If you step out of the bath or shower, have a towel or bathmat on the floor for you to stand on. This stops excess water gathering on the floor and being splashed on walls.


 
• 2. Make sure that the extraction fan is switched on. This sucks some of the steam out of your bathroom, preventing condensation build-up on walls, ceilings, and floors. If your fan is faulty or broken, have it replaced as soon as possible.


 
• 3. If you think your toilet might be leaking, switch off the shutoff valve when you’re not using it. It can be difficult to spot toilet leaks sometimes, but if you hear a low, steady hiss coming from the tank, excess water is leaving the tank. Though this water is probably just going down the drain, any cracks or fissures in the bowl will cause small, constant leaks that can do significant damage to surrounding surfaces over time.


 
• 4. Try and clean your bathroom at least once a week. This includes wiping down surfaces with a cloth and then drying them thoroughly once you’re done. This will prevent mould and rot from setting in and damaging the surfaces in your bathroom.


 

Check that sealant and grout are intact

 

Grout and sealant are the materials which fix your bathroom fittings in place, such as shower cubicles, bathtubs, and tiles. Regular prolonged exposure to moisture and heat in the bathroom can cause grout to crack and wear out. Check the grout and sealant regularly to make sure it’s free of stains and rot. Use a cleaning solution to clean the grout when you are doing the housework, and dry it thoroughly when you’re finished.

If you notice grout is missing or extensively damaged, you should remove any worn-out gout and clean the area thoroughly. Give it a good dry and let it sit for a bit, and then install new grout. This will prevent rot from spreading and stop your fixtures or tiles from shifting.

 

Check regularly for leaking pipes or spouts

 

If you see water dripping from a pipe or other fitting, you should have it repaired as quickly as you can. You can probably do it yourself by tightening the fittings or applying a plumbing putty or sealant.

Even small leaks become progressively worse over time, and the water they leak can accumulate underneath the floor or behind walls. If you are unsure about the extent of a leak, you should contact a professional blocked drain plumber for diagnosis and repair.

 

Check for leaks around the toilet and bath

 

When a bath, shower cubicle, or toilet are installed they are caulked into the floor. It’s important that you check this caulking regularly to make sure that it’s in good condition. If the caulk becomes damaged, the fixtures will leak and moisture will accumulate. Eventually this can cause the fixtures to shift and damage the floor, leading to further water damage.

 

Look for any signs of decay or rot

 

When you’re using or cleaning your bathroom, keep an eye out for any indication that rot, mould, or other forms of decay might be setting in. If you notice stains on surfaces or sealant, you will need to take action.

Make sure that there aren’t any loose tiles

 

Tiles in shower cubicles are particularly prone to coming loose. Make sure that all the tiles in your bathroom are fitting tightly and are adequately caulked. If you notice loose or shifting tiles, remove them as soon as you get the chance, clean and dry the area, and replace the tiles. You can use the same tiles you removed, just make sure you clean and dry them thoroughly before you replace them.

 

Check under the sink

 

This is an important one. Make sure that you look under your sink occasionally to make sure that the pipes and fittings there are in good condition. If they aren’t, water can accumulate in this space and spread rot to other surfaces. It can also damage the foundations of the sink fitting and damage the floor.

 

Install drain covers

 

Drain covers have a very important place in every bathroom. They work by keeping large particles, such as dirt clumps and hair, out of the drains where they could cause blockages. You probably already have drain covers over your drains, so make sure that they are kept clean and clear of debris. This will prevent any blockages from occurring in the drain, which could cause leaks and internal flooding.

https://blockeddrainplumbers.com/how-to-prevent-bathroom-water-damage

 

Hopefully you liked our article on Common Causes of Water Damage in a Bathroom. Thank you for spending some time to browse our posting. For those who liked our blog post kindly remember to share it. We truly appreciate reading our article about Looking for Signs of Water Damage in the Bathroom.

Schedule Appointment